Ion, the perfect amplification companion for the Comet
The Exogal Ion is a high performance PowerDAC that is specifically designed to be an amplifier and processing extension to the Comet. The Ion connects to the Comet via the EXONET Interface and provides 125 watts per channel (into 8 ohms).
The Ion integrates fully with the Comet and there are no complicated remotes or apps required - the Comet handles it all for you! Simply connect the Comet and the Ion together with one cable and you're done!
The Ion PowerDAC now incorporates some internal changes, yielding significant performance improvements. Existing Ions can be upgraded - see below.
- Approximately 10% more effective power
- More robust bass at lower volumes
- More articulate highs at louder volumes
- Higher roll off frequency giving greater range
- Flatter, more realistic frequency response all across the Ion's frequency and volume range
- More reliable performance across wider mains voltage ranges
- Faster, more accurate predictive speaker protection
- Increased tolerance and protection from anomalous behavior
"Can report no regrets about the upgrade! There’s of course no room for blind A/B in such things, and there is a human tendency to want it to sound better—that said, I just put this http://open.qobuz.com/album/qt5t3wy6twlvc?track=54360456 on randomly, and was struck by how punchy and tight everything is. After a few days listening to a variety of very familiar tunes, I’m really please with where my whole system is now at. Thanks again for a great product and outstanding customer service without the usual bullsh-t." - Brent S.
"Jeff, the Ion is wonderful with rich, balanced, natural, detailed sound, all from such a small box it seems miraculous. It is also dead quiet. It is nice not to need all those snake oil cables. The Comet works perfectly. [...] I look forward to the release of your new product although I don’t use Roon, Tidal and all that being into classical music and some jazz. Thanks, rt" - Robert T.
"Listening to Planet Drum tonight. I am surprised and very pleased with the resolution - particularly the bass resolution - at lower volume levels. It is very clear with notes jumping out in the right way. Instruments have more character. I think my Silverline speakers are less laid back, and more energized - piano sounds a bit more powerful, closer to the real thing.
I think your changes took a while to break in, but they are there and a very worthwhile upgrade. Cheers.
Hope all is moving along well with the Vortex." - Alan Y.
(to be updated to reflect HyperDrive)
POWER OUTPUT: 125W 8 ohms per channel, 150 watts peak power
MINIMUM LOAD: 2 ohms per channel
PEAK OUTPUT CURRENT: 10 amperes per channel
FREQUENCY RESPONSE: 5 Hz to 22kHz
THD: 0.03% THD @ 1W @ all frequencies into 4 ohms
OUTPUT NOISE: 170uVRMS A-weighted 10Hz-20KHz
VOLTAGE GAIN: NA, Digital Input
DAMPING FACTOR: > 30 into 1 ohms, >100 into 4 ohms
OUTPUT IMPEDANCE @ 100Hz: < 0.03 ohms
DYNAMIC RANGE: >105dB, A-weighted
INPUT VOLTAGE FOR MAX OUTPUT: NA, Direct Digital Input
INPUT CONNECTION: EXONET, proprietary digital interface
OUTPUT CONNECTION: 3-way Binding Post (Bare Wire, Banana Jack, Lug)
OPERATING POWER: 800 W Max, Typical 50W
STANDBY POWER: <2 W
OPERATING VOLTAGES: Universal , 100-240VAC 50/60 Hz
SIZE: 1.875 x 7.45 x 11.5 in., (47.6 x 190 x 292 mm)
WEIGHT: 9 lbs, 4.08 kg